Wafer Carrier Guide

FOUP vs FOSB: What Is the Difference?

A FOUP (Front Opening Unified Pod) protects wafers inside the fab as they move between process steps. A FOSB (Front Opening Shipping Box) protects wafers in transport and storage, including shipment from wafer supplier to device maker. Both are front-opening wafer carriers used in semiconductor manufacturing. The standard ePAK eFOUP300-A/AF and eFOSB300-A both hold 25 x 300mm wafers at 10mm spacing and fit SEMI E62 FIMS load ports.

By ePAK. Updated .

ePAK eFOUP300-A Front Opening Unified Pod with static dissipative carbon fiber PC shell
Inside the fab

What Is a FOUP?

Front Opening Unified Pod

A FOUP is a front-opening wafer carrier that protects wafers between process steps. It moves through the fab on overhead hoists (OHT), automated guided vehicles (AGV) and stockers.

View the eFOUP ›
ePAK eFOSB300-A Front Opening Shipping Box with clear shell holding 25 x 300mm wafers
Between sites

What Is a FOSB?

Front Opening Shipping Box

A FOSB is a front-opening shipping box that protects 300mm wafers in transport and storage, including shipment from wafer supplier to device maker.

View the eFOSB ›

FOUP and FOSB Side by Side

Scroll to open both carriers and see what differs and what stays the same. Shown here: the 25-slot, 300mm setup of each.

The shell

A carbon fiber shell and a clear shell

The ePAK eFOUP shell is static dissipative carbon fiber PC. The eFOSB shell and door are clear PC, for visual wafer inspection.

ePAK FOUP with carbon fiber shell and closed door, 3D render ePAK FOSB with clear shell and door, 3D render
The load

The same 25-slot load

Both open at the front. In the setup shown, each holds 25 x 300mm wafers at 10mm spacing.

ePAK FOUP with door removed, showing 25 x 300mm wafers, 3D render ePAK FOSB with door removed, showing 25 x 300mm wafers, 3D render
The interface

The same interface underneath

Both use kinematic coupling and fit SEMI E62 FIMS load ports. The main difference is the job: inside the fab, or between sites.

Underside of the ePAK FOUP with kinematic coupling, 3D render Underside of the ePAK FOSB with kinematic coupling, 3D render

Illustrative renders from ePAK 3D models, with wafer supports simplified. The FOUP shown uses the Modular FOUP shell, which has the same outer size as the eFOUP300-A.

FOUP vs FOSB: Four Main Differences

Values are for the ePAK eFOUP300-A/AF and eFOSB300-A.

Main job

FOUPProtects wafers between process steps inside the fab
FOSBProtects wafers in transport and storage

How it moves

FOUPOHT, AGV and stockers inside the fab
FOSBShipped between sites, from wafer supplier to device maker. Also designed for AMHS and robotic transfer

N2 purge

FOUP2 or 4 ports, to maintain an inert atmosphere inside the FOUP
FOSBNo N2 purge ports listed. Available with or without a membrane filter

Shell

FOUPStatic dissipative carbon fiber PC, with a rear window option
FOSBClear PC, for visual wafer inspection

What FOUPs and FOSBs Have in Common

On the standard ePAK eFOUP300-A/AF and eFOSB300-A.

  • 25 x 300mmwafers per carrier
  • 10mmwafer spacing
  • SEMI E62FIMS load port interface
  • Auto + manualAMHS compatible, opens and closes by hand too

Not every FOUP has this format. The Modular FOUP has the same outer size, with one insert chosen at order: 25 or 13 x 300mm wafers, 25 or 13 x 200mm wafers, 25 x 276mm film frames, or a probe card. The Frame FOUP is made for 380mm film frames.

How FOUPs and FOSBs Work Together

An example flow that uses both carriers.

  1. FOSBFront Opening Shipping Box

    Wafer supplier

    Wafers leave the supplier in a FOSB.

  2. Transport and storage

    The FOSB protects the wafers on the way to the device maker.

  3. FOUPFront Opening Unified Pod

    Device maker's fab

    Wafers move from tool to tool in a FOUP.

The eFOSB300-A is also designed for SEMI E62 FIMS door mechanisms and kinematic coupling, so it can dock on an automated load port for processing or inspection.

FOUP or FOSB: Which One Do You Need?

FOSB vs FOUP comes down to what the wafers are doing: moving through the fab, or shipping between sites.

Choose a FOUP when

  • Wafers stay in the fab and move from tool to tool
  • They travel on overhead hoists (OHT), AGVs and stockers
  • You need N2 purge: the ePAK eFOUP comes with 2 or 4 ports
  • You want PEEK at critical wafer contact areas
View the eFOUP

Choose a FOSB when

  • Wafers ship from one site to another
  • You want to inspect wafers visually through a clear shell and door
  • You work to SEMI M31, the mechanical specification written for this use
  • You want an overPAK instead of foam in the shipping carton
View the eFOSB

300mm FOUP vs FOSB: Full Comparison

All values are for ePAK carriers, the eFOUP300-A/AF and the eFOSB300-A. Carriers from other manufacturers can differ.

FeatureFOUPFOSB
Full nameFront Opening Unified PodFront Opening Shipping Box
Main useProtecting wafers between process steps inside the fabProtecting wafers in transport and storage
Capacity25 x 300mm wafers25 x 300mm wafers
Wafer spacing10mm10mm
Purge and filterN2 purge, 2 ports (A) or 4 ports (AF)Optional membrane filter, no N2 purge ports listed
ShellStatic dissipative carbon fiber PCClear PC
DoorInsulative PC, PEEKClear PC
Load port interfaceKinematic coupling, SEMI E62 FIMSKinematic coupling, SEMI E62 FIMS
AutomationAMHS including OHT, AGV and stockers, top robotic flangeAMHS compliant, top robotic flange option
Manual handlingManual opening and closing, handle optionsManual opening and closing, side handle options
SEMI standards listedE47.1, E57, E62E47.1, E57, E62, E106, M31
IdentificationRFID option (horizontal or vertical), card holders, info tagsInsert-molded barcode labels, info tag holder, RFID option
Wafer visibilityRear window option: amber or clearClear shell and door
CleaningAutomatic washer, without removing door or internalsLiquid flow-through, without disassembling the door
Weight, empty5.4 kg4.9 kg
Outer size (W x D x H)420 x 342 x 338mm, with handles and robotic flange395 x 340 x 338mm, with handles and robotic flange

Values from ePAK product documentation. Options depend on configuration.

FOUP and FOSB: Frequently Asked Questions

What does FOUP mean?

In semiconductor manufacturing, FOUP stands for Front Opening Unified Pod. It is a front-opening carrier that protects wafers inside the fab. The ePAK eFOUP300-A/AF holds 25 x 300mm wafers.

What does FOSB mean?

In semiconductor manufacturing, FOSB stands for Front Opening Shipping Box, not to be confused with the FosB gene. It is a front-opening box that protects 300mm wafers in transport and storage. The ePAK eFOSB300-A holds 25 wafers.

What is a FOSB in semiconductors?

A FOSB is the carrier used to transport and ship 300mm wafers, for example from a wafer supplier to a device maker. SEMI M31 is the mechanical specification for it. See the ePAK eFOSB.

What is a FOUP in semiconductors?

A FOUP is a front-opening pod that protects wafers between process steps inside the fab. See the ePAK eFOUP.

What is the difference between a FOUP and a FOSB?

A FOUP is built for use inside the fab, between process steps. A FOSB is built for transport and storage. On ePAK carriers, the eFOUP300-A/AF has N2 purge ports and a static dissipative carbon fiber PC shell, and the eFOSB300-A has an optional membrane filter and a clear PC shell and door. Both hold 25 x 300mm wafers.

How many wafers are in a FOUP?

The ePAK eFOUP300-A/AF holds 25 x 300mm wafers at 10mm spacing. Other setups exist: the ePAK Modular FOUP also comes with 13 slots at 20mm spacing, or with an insert for 200mm wafers.

Can a FOSB be used as a FOUP?

It can dock on an automated FIMS load port for processing or inspection. The ePAK eFOSB300-A is also designed for AMHS and robotic transfer, and it works by hand. Its data sheet describes it for transport and storage and lists no N2 purge ports. For N2 purge in the fab, see the ePAK eFOUP.

Does a FOSB have purge ports?

Not on the ePAK eFOSB300-A: its documentation lists an optional membrane filter and no N2 purge ports. The ePAK eFOUP has 2 ports (eFOUP300-A) or 4 ports (eFOUP300-AF) for N2 purge.

Which SEMI standards apply to FOUPs and FOSBs?

ePAK lists SEMI E47.1, E57 and E62 for the eFOUP300-A/AF. The eFOSB300-A data sheet lists SEMI E47.1, E57, E62, E106 and M31. E47.1 covers boxes and pods for 300mm wafers, E57 kinematic couplings, E62 the FIMS interface, E106 physical interfaces and carriers, and M31 the FOSB itself.

Can FOUPs and FOSBs be cleaned?

Both ePAK carriers can be cleaned without disassembling the door. The eFOUP300-A/AF goes through an automatic washer without removing the door or internals. The eFOSB300-A is compatible with liquid flow-through cleaning.

What is the difference between a FOUP, a FOSB and a wafer cassette?

A wafer cassette is an open carrier that holds wafers in slots, without a sealed door. A FOUP and a FOSB are closed, front-opening carriers for 300mm wafers: the FOUP for use inside the fab, the FOSB for transport and storage. See ePAK open wafer cassettes.

Are there other FOUP formats?

Yes. The Modular FOUP has the same outer size as the eFOUP300-A/AF, with one insert chosen at order for 300mm or 200mm wafers, 276mm film frames or probe cards. The Frame FOUP holds 13 x 380mm film frames and runs on film frame FOUP load ports (SEMI E199).

Looking for a FOUP or FOSB?

See the options, specifications and order details on the product pages, and request a quote or documents there.